Urgent advice needed please, in France. Fog light fallen out.

G

G-A-R-Y

Member
I've just hit the front of my van whilst away in France and the fog light has fallen out. I've been to the supermarket and bought a pack of two part epoxy glue.

My question is how do I get to it.
1000058210.jpg
 
Maybe you will have to remove the whole front bumper cover to do the job properly but do these pages from the workshop manual help?
1788803399666.png
1788803472186.png
1788803541223.png

PS I'm also in France, at Raucoules tonight but just generally wandering, home beginning of October.

Rod
 
Would anyone know the correct part number for the nearside fog light for a December 22 crafter.
Volkswagen want a lot more than my local man dealer but the chap there is unsure of the part number. He could only check a similar van in the yard.
I need to pay for it before they order it.

There is a little sticker on it with a barcode. Would that contain the correct part number.
 
Ah, maybe I can see why there is confusion. VW changed the light in 2022 and again in 2023.

I guess it was originally 7C0 941 661A up to 06/06/2022 which then was replaced by 7C0 941 661B which was subsequently replaced by 7C0 941 661C at 15/05/2023 which according to the parts info that I can find is the only one now available and priced at about £100 plus VAT.
My best suggestion would be go to your VW dealer quoting your VIN and ask for the currently available part number. Then go back to MAN who should now be able to cross refer to their part numbering system.
By the way, VW car dealers should now be able to quote and supply commercial vehicle parts if they don't need coding to the vehicle.

Good luck.
 
Maybe this is too late but, the bit circled in yellow, does come out, on my van that is a step to get to the windscreen, and do take them out to allow your foot step into that space. If you pull it out, it will give you space from above to the fog light.

IMG_9281.jpeg
IMG_9282.jpeg
 
Yes, I did remove that plate which allowed me to get the fog light out without removing the wheel arch liner. The light is now glued back in place to save having the bulb failure warning display on the dash.
 
You must log in or register to reply here.
Back
Top