Our 2026 westfalia Sven Hedin campervan
- Thread starter Cgtmiles
- Start date
We had our first night away in it last weekend. Spending 2 nights in Henley C&MC site
Really nice site, actually nicer imo than Swiss farm further down the road. We had a nice little pitch tucked away on the dead grass
I’m still getting used to driving it and it still feels quite big to me which is a bit of a worry as we didn’t have to go down any small roads to get there. It also didn’t help that the government alert message went off as we were going from the M25 to the M4 and it sounded like the van was having a breakdown!
Really nice site, actually nicer imo than Swiss farm further down the road. We had a nice little pitch tucked away on the dead grass
I’m still getting used to driving it and it still feels quite big to me which is a bit of a worry as we didn’t have to go down any small roads to get there. It also didn’t help that the government alert message went off as we were going from the M25 to the M4 and it sounded like the van was having a breakdown!
We sold out T6 the night before picking up this van (just after the eclipse!) to this guy
I had cleaned it up and emptied it ready for PX but this was a bit of a last minute surprise.
I didn’t realise just how well I had this setup and packed and so when I transferred all the stuff into our massive new van it didn’t seem so big after all!
Lots of sorting and repacking to do here. I used 2 of the boxes we had in the t6 kitchen plus a load of other from the house. But more on order!
I had cleaned it up and emptied it ready for PX but this was a bit of a last minute surprise.
I didn’t realise just how well I had this setup and packed and so when I transferred all the stuff into our massive new van it didn’t seem so big after all!
Lots of sorting and repacking to do here. I used 2 of the boxes we had in the t6 kitchen plus a load of other from the house. But more on order!
There is a lot of noise coming from the kitchen when driving. After having driven round the T6 empty for the first time in 6 years, and being amazed at how quiet it was, it was a bit of a shock driving the Sven, it sounded like an old bus!
So first thing is the fridge which according to the FB group is a big culprit so I had the rods in the doors out yesterday and covered in tape
Not sure if this worked or not as I haven’t test driven it yet
So first thing is the fridge which according to the FB group is a big culprit so I had the rods in the doors out yesterday and covered in tape
Not sure if this worked or not as I haven’t test driven it yet
I have already bought some accessories for the awning (Thule 6300, I think 3.25m long and 2.5m wide)
As everyone’s recommendation I got the strap down kit, standard.
But I also got the tension arm kit, these parts come on the bigger awnings by default but are an option on this size so good to spec it up and get a bit more rigidity
Finally I got the tension rafter G2, I couldn’t quite complete the installation of this on site as you need a drill but I could temporarily install it as the tension holds it in. Again this is supposed to add rigidity and tension the canopy. It also includes 2 poles which now need storing when not on site!
Finally, I did get the obligatory peggy peg feet for the awning poles as well as some more pegs (in black and grey) these all worked really well
I well get some better photos of all this but here is a taster
As everyone’s recommendation I got the strap down kit, standard.
But I also got the tension arm kit, these parts come on the bigger awnings by default but are an option on this size so good to spec it up and get a bit more rigidity
Finally I got the tension rafter G2, I couldn’t quite complete the installation of this on site as you need a drill but I could temporarily install it as the tension holds it in. Again this is supposed to add rigidity and tension the canopy. It also includes 2 poles which now need storing when not on site!
Finally, I did get the obligatory peggy peg feet for the awning poles as well as some more pegs (in black and grey) these all worked really well
I well get some better photos of all this but here is a taster
Now the negatives so far:
Firstly, the relatively minor things, they forgot to give us the main cable (we have one so no bother but a 10m was included), and it was supposed to have factory fit mud flaps. I emailed them about these and they were very quick to respond and are sending asap.
More seriously, we have a problem with the cupboard latches, apparently it’s a bad batch and they have new ones but not great after a few days!
Of the 11 latches 9 are showing some signs of damage.
Firstly, the relatively minor things, they forgot to give us the main cable (we have one so no bother but a 10m was included), and it was supposed to have factory fit mud flaps. I emailed them about these and they were very quick to respond and are sending asap.
More seriously, we have a problem with the cupboard latches, apparently it’s a bad batch and they have new ones but not great after a few days!
Of the 11 latches 9 are showing some signs of damage.
Another niggle is that I have noticed that there actually isn’t that many USBs. This was a bit of an oversight that I didn’t notice this before but there is only USBs (1x an and 1x c) on the rear pillar and another set by the seat at the front. There is no USB on “my” (kitchen) side of the bed. I’ll need to find a solution to this as because we don’t have an inverter when we aren’t on mains we will have very limited power!
. You'll soon sort out the small niggles that comes with a new van . Happy travels 
Currently trying to spec up a duvalay mattress and fitted sheets but it has really weird shaped mattresses in 4 pieces
this is the topper dimensions (thanks mainly to someone on the FB group)
Split in half, this is the dimensions for the fitted sheets for the 2 main mattresses in the van
Then this is the dimensions of the 2 fillets that top and tail the main mattresses. These are much thinner and Velcroed to the bed board so I have asked if they can do little fitted sheets for these
Not going to be cheap but once done should sort it for the foreseeable
this is the topper dimensions (thanks mainly to someone on the FB group)Split in half, this is the dimensions for the fitted sheets for the 2 main mattresses in the vanThen this is the dimensions of the 2 fillets that top and tail the main mattresses. These are much thinner and Velcroed to the bed board so I have asked if they can do little fitted sheets for theseNot going to be cheap but once done should sort it for the foreseeable