Double and single swivel possible?

[pabloblue]

Having recently acquired a van which has been converted, I would like to fit seat swivels.
I want to keep the double as it is good for storage. So I will be taking a trip to Morecambe to get that fitted.
The single needs a handbrake solution.
I have seen three different options.

Lower the handbrake mounting, l am not keen on this as it means access is more awkward.

Replace the lever for the ratchet release type as per Grand California. These are quite pricey £300 !

Fit the Audrio tilt bracket. I prefer this, but am not sure I will have enough space to tilt sufficiently with a double seat.

Has anyone got the Audrio with a double adjacent?
Does it work?

Thanks in advance

 

[airhoguk]

Unfortunately the audrio won’t work with a double as it goes over about 15 degrees and stops which doesn’t allow enough space for the single to swivel. The California handbrake. LLLParts list it here Volkswagen Titan Black 2N0711303B82V - LLLParts
About £100 less and usually a fairly quick turnaround, part no. from here Van Parts Direct | VW Grand California 2020-2021 Folding Handbrake| Genuine VW Commercial Parts

 

[rod_vw]

If your van is post 2023 and needing to extend the wiring loom to the double seat swivel drop me a DM.

 

[pabloblue]

Thanks for the info airhoguk, looks like the best option.
Rodvw, it's a 2020 so I should be ok with the loom thanks.

 

[rod_vw]

Thanks for the info airhoguk, looks like the best option.
Rodvw, it's a 2020 so I should be ok with the loom thanks.

That is correct, good look with your conversion. Please keep us all up to date with your build.