Hi again, not sure if this is the right section but hopefully someone has solved the issue I’m getting.
The water pump for the sink pulses when it’s on and is quite noisy. Water runs through and seems to flow in time with the pulses, ie more/less/more if you see what I mean.
It’s a shurflo (apologies for blurry image but I was having to rummage underneath for it!)
Is it an air in the system issue? In which case any tips to resolve it? Or a new pump job….
Unfortunately it also seems the tap itself has also sprung a leak underneath so if I need to replace that I figure I might as well get the pump at the same time.
Thanks in advance as always!
![IMG_9072.jpeg IMG_9072.jpeg](https://craftertgeforum.com/data/attachments/0/780-f151711470bdd5413aace70d6d34d65e.jpg)
The water pump for the sink pulses when it’s on and is quite noisy. Water runs through and seems to flow in time with the pulses, ie more/less/more if you see what I mean.
It’s a shurflo (apologies for blurry image but I was having to rummage underneath for it!)
Is it an air in the system issue? In which case any tips to resolve it? Or a new pump job….
Unfortunately it also seems the tap itself has also sprung a leak underneath so if I need to replace that I figure I might as well get the pump at the same time.
Thanks in advance as always!
![IMG_9072.jpeg IMG_9072.jpeg](https://craftertgeforum.com/data/attachments/0/780-f151711470bdd5413aace70d6d34d65e.jpg)