Thitronik WiPro III safe.lock not compatible

MikeDX11

New member
Hello there, new to this forum. Looks like a great place to search for some info on my issue.
I have a 2020 MY crafter that I am currently converting into a campervan. I want to install the Thitronik WiPro III Safe.Lock system which has some great features like central remote locking and tracking etc..
Now this system is specifically made for crafters with central locking systems and taps into the CanBus system.
Upon installation I came across a small note saying: "

ATTENTION: Before installing the WiPro III safe.lock system, it is essential to check whether the vehicle
configuration is compatible with the current version of the safe.lock system.
To do this, carry out the following procedure: Lock the vehicle by radio using the original key. After a wait-
ing time of 8 minutes, check whether the vehicle can be completely unlocked manually via the driver's
door lock.
If it is only possible to unlock the driver's door while all other doors remain locked, it is not possible to use
the WiPro III safe.lock system.

You guessed it, My car does not unlock all doors on key turn...
Is there anyone here that can test their vehicle to see if the doors DO open all upon key turning after 8 minutes of locking. If so, I am very curious to see what the specs of that vehicle are and whether I could modify my crafter to match these specs.

thank you for helping out!
 
My 2022 Crafter locks and unlocks all doors from turning the key in the lock.

I beleive there is a setting in the MIB that allows you to spec only opening the drivers door from lock/unlock but I'm not sure if this is just when using the fob rather than turning the key.

I'm too busy at the mo but tomorrow I will have a play and see if this setting (that I think I have seen in the MIB settings) makes any changes to how mine works.
 
Last edited:
I didn't realise when first responding to the thread that it was so old, however, as I said I would have a play and update the forum and because it may catch others out, I have.

I can confirm that if you set single door opening in vehicle settings it will not when turning the key in the lock open anything other than the drivers door. If this affects you simly change the setting to all doors.

PXL_20250325_133813667.jpg
 
OK so we have had a discussion on what doors unlock when the physical key is used in the driver's door lock.

Who knows how the change which doors unlock with the centre button on the key fob. Mine only unlocks the rear doors? I believe some versions open just the sliding door which is what I want it to do.

Maybe it's a VCDS adaption job which I can do if someone can come up with the coding details.
 
Back
Top